Device controls
This guide provides information about the operational features, controls, and status indicators of the Convo AI Device Kit R1. Use this as a reference while using the device.
Power management
| Task | How to do it |
|---|---|
| Power on | Press and hold the Middle button for 3 seconds or longer |
| Power off | Press and hold the Middle button for 3 seconds or longer (when powered on) |
| Charge battery | Use any USB Type-C port on the device |
| Use without battery | Connect a Type-C cable directly to the device |
Volume control
| Task | How to do it |
|---|---|
| Increase volume | Single click the Left button |
| Decrease volume | Single click the Right button |
Network configuration
| Task | How to do it |
|---|---|
| Enter network configuration mode | When powered on, press and hold the Left button for 3+ seconds. The device enters waiting state and is ready to pair via Bluetooth. |
| Use hotspot-only setup | Pre-configure a hotspot on your smartphone with name AGORA_AI_KIT and password 1234567890. The device automatically detects and connects during network configuration. |
Voice interaction
| Task | How to do it |
|---|---|
| Wake up the device | Short press the Middle button. |
| Resume after idle | The device disconnects after 3 minutes of inactivity. Short press the Middle button to resume. |
Role management
Switch AI agent roles through the Agora Convo AI app or by pressing the Reset Button on the right side of the device. After switching, wake up the device to complete the process.
Device status
The LED indicator displays your device's current state:
| LED Pattern | Status |
|---|---|
| Alternating red and green blinking | Waiting for network configuration |
| Red blinking | Waiting for network connection |
| Green blinking | Network connected, AI agent disconnected, waiting for wake up |