Introduction

To ensure smooth communications, we recommend conducting a media device test before joining a channel to check whether the microphone or camera works properly. This function applies to scenarios that have high-quality requirements, such as online education.

Implementation

Ensure that you understand how to Start a Call or Start an Interactive Broadcast.

  • Choose either of the following ways to test the audio devices:
    • Call the startEchoTestWithInterval method to test if the audio devices and network connection are working properly.
    • Call the startRecordingDeviceTest method to test the audio recording devices, and call the startPlaybackDeviceTest method to test the audio playback devices.
    • Call the startAudioDeviceLoopbackTest method to test the audio device loopback (including the recording and playback devices).
  • Call the startCaptureDeviceTest method to test the video capture devices.
Test the devices before joining a channel.

Echo test

Call the startEchoTestWithInterval method to test if the audio devices, such as the microphone and the speaker, are working properly.

To consuct the test, call startEchoTestWithInterval, and set the interval parameter in this method to notify the SDK when to report the result of this test. The user speaks, and if the recording plays back within the set time interval, the audio devices and the network connection are working properly.

// Swift
// Start the echo test.
agoraKit.startEchoTestWithInterval(10)

// Wait and check if the user can hear the recorded audio.

// Stop the echo test.
agoraKit.stopEchoTest
// Objective-C
// Start the echo test.
[agoraKit startEchoTestWithInterval: 10];

// Wait and check if the user can hear the recorded audio.

// Stop the echo test.
[agoraKit stopEchoTest];

Recording device test

Call the startRecordingDeviceTest method to test whether the local audio recording device, such as the microphone, is working properly.

To conduct the test, the user speaks, and the SDK reports the audio volume information in the reportAudioVolumeIndication callback. A UID of 0 indicates the local user.

When the test finishes, call the stopRecordingDeviceTest method to stop the current test.

// swift
// Starts the recording device test.
agoraKit.startRecordingDeviceTest(1000)

// Stops the recording device test.
agoraKit.stopRecordingDeviceTest()
// objective-c
// Starts the recording device test.
[agoraKit startRecordingDeviceTest: 1000];

// Stops the recording device test.
[agoraKit stopRecordingDeviceTest];

Audio playback device test

Call the startPlaybackDeviceTest method to test whether the local audio playback device, such as the speaker, is working properly.

To conduct the test, specify an audio file for playback. If you can hear the audio file, the audio playback device works properly.

When the test finishes, call the stopPlaybackDeviceTest method to stop the current test.

// swift
// Starts the playback device test.
agoraKit.startPlaybackDeviceTest("audio file path")

// Stops the playback device test.
agoraKit.stopPlaybackDeviceTest()
// objective-c
// Starts the playback device test.
[agoraKit startPlaybackDeviceTest: @"audio file path"];

// Stops the playback device test.
[agoraKit stopPlaybackDeviceTest];

Audio device loopback test

Call the startAudioDeviceLoopbackTest method to test whether the local audio devices, including the microphones and speakers, are working properly.

To conduct the test, the user speaks, then the microphone captures the local audio and plays it through the speaker. The SDK reports the audio volume information in the reportAudioVolumeIndication callback. A UID of 0 indicates the local user.

When the test finishes, call the stopAudioDeviceLoopbackTest method to stop the current test.

Video capture device test

After calling the enableVideo method, call the startCaptureDeviceTest method to test whether the local video devices, such as the camera, are working properly.

To conduct the test, specify a window view that displays the image. If you can see the local video view, the video devices work properly.

When the test finishes, call the stopCaptureDeviceTest method to stop the current test.

// swift
// Starts the video capture device test.
agoraKit.startCaptureDeviceTest("view window")

// Stops the video capture device test.
agoraKit.stopCaptureDeviceTest
// objective-c
// Starts the video capture device test.
[agoraKit startCaptureDeviceTest: "view window"];

// Stops the video capture device test.
[agoraKit stopCaptureDeviceTest];

API Reference

Considerations

  • Ensure that you call the corresponding stop methods after the test ends. Otherwise, you cannot take another test, or enter a call using joinChannelByToken.
  • If the input device fails to initialize, check the error message in Developer Center.